OHAUS 7000 Series Instruction Manual

Also see for 7000 Series: Instruction manual Service manual Instruction manual

7000 SERIES INDICATORS EN 75The Prompt setting determines the sequence in which the operator is prompted to enter the tare weight and samplequantity.Options are Tare-Sample and Sample-Tare. The default is Tare-Sample.Auto Clear APWThe Auto Clear APW setting determines whether the average piece weight value (APW) will be cleared when thescale returns to zero, or if the APW will be retained for the next counting sequence. Settings are Enabled andDisabled (the default).DisplayLine 1, Line 2These parameters determine what is displayed on the two lower lines of the display. Both lines have the sameoptions – Disabled (the default), ID, Description and APW.Menu KeysThe Menu Keys parameters determine which functions will be accessible from the Operator Menu. Each of thekeys is Disabled by default. If the feature accessed by the menu key must be enabled or configured separately, such as the ID Table,enabling the menu key will display the icon in the Operator Menu, but will not give access to the feature.ID TableWhen Enabled, the Operator will be able to access the ID Table to retrieve stored tare and APW values for aproduct.ReportsWhen Enabled, the Operator will be able to generate a report of the records in the ID Table to view and print.Sample/APW SelectWhen Enabled, the Operator will be able to switch from the sampling mode of operation to manual entry of an APWvalue mode when prompted for Sample?.ID MemoryID TableWhen the ID Table is Enabled, stored tare and APW values in the ID Table can be recalled by ID for a quickcounting sequence.TotalizationThis parameter appears only if the ID Table is enabled. When Totalization is Enabled, the terminal stores the totalnumber of pieces counted and the number of transactions for each ID in the ID Table. This parameter is Disabledby default.Clear on PrintThis parameter appears only if the ID Table is enabled. Clear on Print may be Automatic (the default), Manual orDisabled. When Automatic is selected, after the ID Table report is printed, the counter and totals fields will be resetto 0. When Manual is selected, the Operator can choose to clear the counter and totals fields by pressing CLEARwhen viewing the ID Table report. If Disabled is chosen, the counter and total fields cannot be reset in the Reportsview of the Operator menu.ID TableWhen this branch is selected, the first record in the ID Table is displayed. Each record occupies a single screen. Ablank screen indicates the ID Table is empty. The following functions are accessible from this view: