4 Network Settings4-104 cm5520Network Settings Chapter 44.15 TCP Socket SettingsSpecify the TCP socket settings. TCP socket is used during data transmis-sions between the computer application and this machine.TCP SocketSelect whether or not the TCP socket setting is used. Settings can be spec-ified for the following.2 NoteIf “TCP Socket Setting” is set to “OFF”, it may no longer be possible touse some applications on the computer.When SSL settings are not specifiedWhen SSL settings are specified!DetailIf a certificate is enabled with this machine, settings such as the portnumber used with SSL/TLS can be specified. Specify the appropriatesettings for SSL communication.If external server authentication is specified, “Use SSL/TLS” automatical-ly changes to “ON”. To enable authentication, turn the machine off, thenon again after specifying the external server authentication settings.Parameter DescriptionPort Number Specify the port number to be used. To change the setting, pressthe [C] (clear) key, and then use the keypad to type in the desiredport number. (Range: 1 to 65535)Parameter DescriptionUse SSL/TLS Select whether or not SSL/TLS is used in communication whereTCP socket is used.Port Number Specify the port number to be used. To change the setting, touch[Input], press the C (clear) key, and then use the keypad to type inthe desired port number. (Range: 1 to 65535)Port Number (SSL/TLS) Specify the port number to be used with SSL/TLS communication.To change the setting, touch [Input], press the C (clear) key, andthen use the keypad to type in the desired port number. (Range: 1to 65535)
