1 Before using scanning functions1-12 cm5520Before using scanning functions Chapter 11.5 Setup and scanning operationsThe settings required for using the scan functions and the general scan op-eration are shown below.User Settings screen in Utility mode*Specify settings for the basic parameters such as the format in which scan data is saved.“Customizing the Fax/Scan mode screen” on page 3-35“Scan/Fax Settings” on page 3-40[Network Setting] on Administrator Settings screen in Utility mode*Specify the settings in order to use the machine on the network.“TCP/IP Settings” on page 4-17“NetWare Settings” on page 4-39“http Server Settings” on page 4-46“FTP Settings” on page 4-53“SMB Settings” on page 4-57“LDAP Settings” on page 4-62“E-Mail TX (SMTP)” on page 4-72“E-Mail RX (POP)” on page 4-81“S/MIME Communication Settings” on page 4-87“SNMP Settings” on page 4-92“AppleTalk Settings” on page 4-102“Bonjour Settings” on page 4-103“TCP Socket Settings” on page 4-104“Device Setting” on page 4-108“Time Adjustment Setting” on page 4-110“Status Notification Setting” on page 4-113“Total Counter Notification Settings” on page 4-121“PING Confirmation” on page 4-126“SLP Setting” on page 4-128“LPD Setting” on page 4-129“Prefix/Suffix Setting” on page 4-130“Action for Invalid Certificate” on page 4-134One-Touch Destination/User Box Registration screen in Utility mode*Specify e-mail addresses for e-mail transmissions, register FTP servers, and specify destinationcomputers.“Registering an address book destination” on page 3-10“Registering a group destination” on page 3-24“Specifying e-mail settings” on page 3-27Position the document.Specify a recipient.
