Scanning 2cm5520 2-5Scanning Chapter 22.2 Displaying the Fax/Scan mode screenFirst display the Fax/Scan mode screen in order to perform scan operations.When the machine is ready to begin making copies after being turned on, theBasic screen appears.Press the [Fax/Scan] key to display the Fax/Scan mode screen.To activate a function or to select a setting, lightly touch the desired buttonin the touch panel.1 29 8 76345No. Part Name Description1 Sub display area Touch [Job List] to display a screen showing the jobs cur-rently being performed or waiting to be performed. Touch[Mode Check] to check and change the destination set-tings.In addition, the amount of toner remaining can bechecked.2 Message display The status of the machine and details on operations thatmust be performed are displayed here.3 Number of destinations The number of specified destinations are indicated.4 [Enter New Address] button Touch this button to enter a destination when performingScan to E-Mail, Scan to FTP or Scan to SMB operations orto select a user box where a job is to be stored. This but-ton does not appear if “Manual Destination Input” (dis-played by touching [Security Settings] on theAdministrator Settings screen, then [Security Details]) isset to “Restrict”.
