Special copy and scan jobs 109▼ Shift the image1 Open the ‘Layout’ card in the ‘Copy’ section.[58] Image shift2 Press the ‘Shift’ function key and select a horizontal shift value by pressing thenumeric or arrow keys until the required distance is set to shift the image to theleft or to the right.3 Press the ‘Shift’ function key again and select a vertical shift value by pressingthe numeric or arrow keys until the required distance is set to shift the imageupwards or downwards.4 Make other settings as required.5 Feed the original.Note: You can use horizontal and vertical shift at the same time.Mirror imageWith the Océ TDS800 Scanner you can make a mirror image copy of anoriginal, as shown in the next figure:[59] Example of a mirror-image copy
