Océ Power Logic®: Settings Editor 133Use the Océ Settings EditorKey Operator settingsThe Key Operator is responsible for correct default settings of the system.These settings include the default settings, and groups of default printersettings for the print jobs, the scan-to-file jobs and the copy jobs.The Key Operator can define all timer settings, like the panel time out and thesleep mode time out.Note: Only one Key Operator or System Administrator can log on to the OcéSettings Editor at a time.In order to perform special Key Operator functions, you must log on to the OcéSettings Editor as a Key Operator.As these functions are restricted to a dedicated Key Operator, a password isrequired to access them. The service engineer will provide this password toyou upon installation.Note: When you are finished, make certain you log off from the Key Operatormode of the Océ Settings Editor to prevent unauthorized use of the OcéTDS800.▼ Make Key Operator settings in the Océ Settings Editor1 Maximise the Océ Settings Editor on the screen.2 log on as Key Operator.3 Click on one of the top buttons to display the desired group of settings.4 Select the setting you want to update in the tree structure.5 Update the setting in the update area, as required.Note: A few settings, such as the defaults for the Custom card, are madedirectly from the tree structure area.6 Click on the ‘Apply’ button.The new value is now applied for the settingLog off from log off the Key Operator mode when you have finished updatingthe settings.
