34 Océ TDS800 User ManualCounterOn the operator panel of the Océ TDS800 Printer a counter will be displayedthat gives the user feedback about the progress of the job that is currently beingprinted. The counter, which is located at the bottom of the upper window onthe operator panel, displays the number of sets and the pages printed. Countingstarts at 1. The following options are available:■ When no sets are made, only the current page and the total number of pagesare displayed (e.g. ‘Page 3 of 5’). At the beginning of a job, when the systemdoes not know the total number of pages yet, only the current page may bedisplayed (e.g. ‘Page 5’).■ With set input: set counter. In this case the counter shows the current, thetotal number of sets and the current page (e.g. ‘Set 3 of 5, Page 10’). At thebeginning of a job, when the system does not know the total number of setsyet, only the current set and page may be displayed (e.g. ‘Set 2, Page 5’).■ With set input: multiple sheet counter. In this case the counter shows thecurrent page, the total number of pages and the current copy, e.g. ‘Page 2 of12, Copy 5’). At the beginning of a job, when the system does not know thetotal number of pages yet, only the current page and copy may be displayed(e.g. ‘Page 2, Copy 5’).■ With set input: Océ Matrix logic®. In this case the counter shows the current,the total number of sets and the current page (e.g. ‘Set 3 of 5, Page 10’). Atthe beginning of a job, when the system does not know the total number ofsets yet, only the current set and page may be displayed (e.g. ‘Set 2, Page 5’).KeysWith the keys on the operator panel you can make a number of settings for theOcé TDS800 Printer, such as the media type and size or the preferred language.
