263Safety data sheet Océ E1 tonercontinued on the next pageMATERIAL SAFETY DATA SHEET Number E-198-b-UK(93/112/EEC and ISO 11014-1) Date July 1997Page 1 of 2Océ E1 Toner1. Product and company identificationProduct name Océ E1 TonerPacking Polyethylene bottle, contents 1,0 kg /2.1 lbCompany Océ (UK) Ltd.Address Langston Road, Loughton, Essex IG10 3SLTelephone 0181-508 5544 (contact product safety coordinator)Telefax 0181-508 66892. Composition / information on ingredients3. Hazards identificationIn a toner dust cloud the formation of an explosive dust-air mixture is possible.Toner dust may cause discomfort for the eyes and respiratory tract, in the same manner as inert nuisance dust.To our knowledge, with due observance of the recommended exposure limit and of normal hygiene this product presents no health hazardin normal use.4. First aid measuresEyes contact Rinse with plenty of water.Skin contact Wash with cold water and soap.Inhalation Clean nose, mouth, throat. Cough up. Fresh air.Ingestion Rinse mouth with water. If large quantity swallowed seek medical advice.For any medical advice take along this material safety data sheet.5. Fire fighting measuresExtinguishing media Dry chemical, carbon dioxide, water spray (fog), foamSpecial fire fighting precautions N.A.Hazardous products of decomposition N.A.6. Accidental release measuresSpills can be cleaned with a vacuum cleaner or a damp rag. Do not use warm water, because this makes the powder soft and sticky.7. Handling and storageKeep bottle tightly closed to prevent dust formation. Handle carefully. Avoid breathing dust. Keep in a cool dry place (38 o C, 100 o F).Keep away from direct sunlight or heating devices.No special technical measures for storage.8. Exposure controls / personal protectionNo special technical measures. No personal protective equipment needed.Industrial hygiene: after skin contact wash with cold water and soap.Threshold Limit Value for nuisance dust: 10 mg/m 3.Threshold Limit Value for carbon black: 3,5 mg/m 3 .Threshold Limit Value for amorphous silica: 10 mg/m3 .Ingredients CAS No. ClassiÞcation Weight %Polyester resin 170831-75-1 25-50Iron oxide 1317-61-9 25-50Phenoxy resin PMN P-95-461 10-25Carbon black 1333-86-4 1-5Amorphous silica 68611-44-9 <1
