Using the Océ TDS800 to Copy 61Define settings for the next originalYou can define the settings for each original you want to copy. When‘Automatic feed’ is enabled, you should bear in mind that the original isautomatically pulled into the scanner. If you want to be absolutely sure aboutthe settings that belong to an original, insert an original when the settings arecorrect.Note: You can turn off Automatic feed on the scanner. This offers you thepossibility to change the settings for the next original, even if you already putthe original in place on the scanner feed table.▼ Define settings for the next copy job1 Select all settings required for the next original.2 Insert the next original.If ‘Automatic feed’ is off, press the start key.If ‘Automatic feed’ is on, the original is fed automatically.Note: You can enable or disable this function from the ‘Scanner’ card in the‘Original’ section.Account loggingFor accounting purposes, the system is able to log job information for each job.The job identification attributes and the number of print jobs are logged in theaccount file. For more information on account logging see chapter 10 onpage 171.Note: The account settings are only available if the accounting option isenabled in the system configuration.[20] Accounting function
