Basic copy operations 2cm5520 2-79Basic copy operations Chapter 22.12 Selecting Finishing settingsVarious settings can be selected for sorting and finishing copies fed into thecopy output tray.2 NoteAs the factory default, “Group” is selected.!DetailIf no finisher is installed and all of the following conditions are met, print-ed copies are fed out and sorted in an alternating crisscross pattern.8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.Paper of the same size and type is loaded with the w orientation in onepaper tray and with the v orientation in another tray.The “Auto” Paper setting is selected.The “Auto” Paper setting is not selected when the “Mixed Original” set-ting is selected.2 NoteFrom Administrator Settings mode, the machine can be set so that cop-ies are fed out without being shifted when the finisher is installed. As afactory default, the machine is set to shift the copies that are fed out.For details on specifying settings for shifting copies that are fed out whenthe finisher is installed, refer to “System Settings” on page 11-30.For details on “Fold/Bind”, refer to “Selecting a folding setting” onpage 2-92.2 NoteIf the post inserter has been installed onto the finisher, the finisher can beoperated manually. For details, refer to “Manually using the finisher” onpage 2-98.
