2 Basic copy operations2-82 cm5520Basic copy operations Chapter 2Separating copies by sets (“Sort” setting)0 As the factory default, “Group” is selected.0 If offset sorting is selected while no finisher is installed, printed copies willbe fed out and sorted in an alternating w and v pattern if the followingconditions are met.8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.Paper of the same size and type is loaded with the w orientation in onepaper tray and with the v orientation in another tray.The “Auto” Paper setting is selected.The “Auto” Paper setting is not selected when the “Mixed Original” set-ting is selected.0 If offset sorting is selected while a finisher is installed, printed copies arefed out and stacked on top of each other with each set shifted to separateit.1 In the Basic screen, touch [Finishing].The Finishing screen appears.2 Touch [Sort].
