Utility mode 11cm5520 11-55Utility mode Chapter 1111.7 Printer AdjustmentLeading Edge AdjustmentThe starting print position at the leading edge of each type of paper (withrespect to the paper feed direction) can be adjusted.0 The starting print position is adjusted during manufacturing of themachine. Normally, the starting print position will not need to beadjusted.1 Display the Administrator Settings screen.– For details on displaying the Administrator Settings screen, refer to“Displaying the Administrator Settings screen” on page 11-49.2 Touch [1 System Settings].The System Settings screen appears.3 Touch [7 Expert Adjustment].The Expert Adjustment screen appears.4 Touch [2 Printer Adjustment].The Printer Adjustment screen appears.5 Touch [1 Leading Edge Adjustment].The Leading Edge Adjustment screen appears.6 Touch the button for the paper type to be set.7 Press the [Start] key.– Only paper loaded into the bypass tray can be used.
