Utility mode 11cm5520 11-77Utility mode Chapter 11Punch Horizontal Position AdjustmentThe horizontal position of punched holes when printing with a Punch settingcan be adjusted for each paper size.2 NoteFor details on the Punch settings, refer to “Punching holes in copies(Punch settings)” on page 2-88.0 Before making any adjustments, use a Punch setting to print a samplecopy. Perform the adjustment while checking the sample that wascreated.1 Display the Administrator Settings screen.– For details on displaying the Administrator Settings screen, refer to“Displaying the Administrator Settings screen” on page 11-49.2 Touch [1 System Settings].The System Settings screen appears.3 Touch [7 Expert Adjustment].The Expert Adjustment screen appears.4 Touch [3 Finisher Adjustment].The Finisher Adjustment screen appears.5 Touch [6 Punch Horizontal Position Adjustment].The Punch Horizontal Position Adjustment screen appears.
