11 Utility mode11-46 cm5520Utility mode Chapter 11Administrator Security LevelsSecurity DetailsDescription Default SettingSpecify the range of Administrator mode parameters available to users.• Level 1:Low Power Mode Settings, Auto Zoom (Platen), Auto Zoom (ADF),Specify Default Tray when APS Off, Select Tray for Insert Sheet, Tri-Fold Print Side, Automatic Image Rotation are available to users.• Level 2:Low Power Mode Settings, Output Settings, AE Level Adjustment,Blank Page Print Settings, Auto Zoom (Platen), Auto Zoom (ADF),Specify Default Tray when APS Off, Select Tray for Insert Sheet, Tri-Fold Print Side, Automatic Image Rotation, Copy Operating Screen,Change E-mail Address are available to users.• Prohibit:None of the parameters that are available to users with “Level 1” or“Level 2” are available.ProhibitParameter Description Default SettingPassword Rules Select whether or not password rules are applied. InvalidProhibited FunctionsWhen AuthenticationErrorSelect the operations that are prohibited if userauthentication failed.• Mode 1: Operations cannot be performed for afixed length of time.• Mode 2: When authentication has failedrepeatedly, the control panel can no longer beoperated. The number of times of failedauthentication can be set between 1 and 5.If operation of the control panel is restricted,touch [Release], and then select the itemswhose operation restrictions are canceled.• Users & Accounts: Operations for userauthentication and account track• Secure Print: Operations for confidentialdocuments• User Box: Operations for password-protectedboxes• SNMP: Operations for SNMP v3 Write userauthentication• Release Time Settings: Specify the length oftime until prohibited operations are automati-cally unlocked. The time can be set between 1and 60 minutes.Mode 1 ReleaseTime Settings: 5min.Confidential Docu-ment Access MethodThe operation method for confidential documentscan be viewed. If “Prohibited Functions When Au-thentication Failed” is set to “Mode 1”, this pa-rameter is set to “Mode 1”. If “ProhibitedFunctions When Authentication Failed” is set to“Mode 2”, this parameter is set to “Mode 2”.Mode 1: Type in the ID and password for the con-fidential document, and then select the docu-ment.Mode 2: Type in the ID for the confidential docu-ment, and then type in the password after thedocument is selected.Mode 1
