Chapter 318Tray use in Fax mode 3You can change the default tray that themachine will use for printing received faxes.Selecting Upper>Lower 1>MP will let yourmachine take paper from Upper Tray firstbefore the MP tray. MP>Upper>Lower 1 willtake paper from the MP tray first.Auto Separation allows the machine alwaysto print the first page of the fax document fromUpper Tray. All the remaining pages areprinted from the Lower Tray.Note• You can use four sizes of paper forprinting faxes: A4, Letter, Legal or Folio.When a suitable size is not in any of thetrays received faxes will be stored in themachine ’s memory andCheck Paper Size will appear on theLCD. For details, see Change Drum onpage 112.• If the tray is out of paper and receivedfaxes are in the machine’s memory,No Paper will appear on the LCD. Insertpaper in the empty tray.a Press Menu, 2, 7, 2.27.Tray Use2.Faxa MP>Upperb Upper>MPSelect ab & OKb Press a or b to chooseUpper Tray Only,Lower Tray Only 1 , MP Only,MP>Upper>Lower 1 , Upper>Lower1>MP or Auto Separation. Press OK.1 Lower Tray Only, Lower or AutoSeparation appears only if the optionalLower Tray is installed.Tray use in Print mode 3You can change the default tray the machinewill use for printing from your computer.a Press Menu, 2, 7, 3.27.Tray Use3.Printa MP>Upperb Upper>MPSelect ab & OKb Press a or b to chooseUpper Tray Only,Lower Tray Only 1 , MP Only,MP>Upper>Lower 1 or Upper>Lower1>MP. Press OK.1 Lower Tray Only or Lower appears only ifthe optional Lower Tray is installed.Note• The setting in the printer driver will takepriority over the setting made on thecontrol panel.• If the control panel is set toUpper Tray Only,Lower Tray Only, MP Only orMP>Upper>Lower and you choose ‘AutoSelect’ in the printer driver, the tray usewill be MP>Upper>Lower.If the control panel is set toUpper>Lower>MP and you choose ‘AutoSelect’ in the printer driver, the tray usewill remain Upper>Lower>MP.