10 Utility Mode10-12 Network FaxUtility Mode Chapter 1010.2.15Administrator Setting >> Fax Setting >> TX/RX SettingSets the print method at the transmission/reception mode. (page 10-51)*1: The displays are different depending on the country.*2: To make the setting of [Print Paper Size] enable, set [Tray Selection forRX Print] to [Auto].*3: Tray type may be different depending on the installed option.*4: When [Min. Reduction for RX Print] is set to [x1.0], [Print PaperSelection] and [Tray Selection for RX Print] are set to [Auto]. [PrintSeparate Fax Pages] is turned to [OFF].Item Description Available valueDuplex Print(RX)When set to ON, the original received isprinted on both sides of the paper.OFF * / ONInch Paper Pri-ority Over A4 *1 By setting this function ON, inch seriesform of paper is preferentially selected forthe received original.OFF * / ONPrint Paper Se-lectionWhen the priority of each size is set:A record is made in the priority size.When no priority size is set, a record ismade in the nearest size.When the fixing of each size is set:A record is made only in the size set.Auto Select * / Fixed Size/ Priority SizePrint PaperSize *1 *2 Set the paper size on which the docu-ment received is printed.The default varies according to the set-ting of [Inch Paper Priority Over A4].A3 / B4 / A4* / 8 1 /2 × 11 /8 1 / 2 × 14 / 11 × 17Tray Selectionfor RX Print *3 Determines the paper tray if you want tofix the paper tray for received document.Auto * / Tray 1 / Tray 2 /Tray 3 / Tray 4Min. Reductionfor RX Print *4 Set the output magnification of the origi-nal received.87-96 * / × 1.0Print SeparateFax PagesDetermines the default of transmissionmode.OFF * / ONNo. of Sets (RX) Set the number of prints for the receiveddocument.1 * -10
