Utility Mode 10Network Fax 10-31Utility Mode Chapter 1010.10 TCP/IP SettingWhen a setting is made to ON, set the IP Address, the Subnet Mask and theDefault Gateway.!DetailRefer to "User’s Guide (Network/Scanner)" for more information aboutTCP/IP Setting.* indicates factory default setting.TCP/IP Setting1 Open the Administrator Setting screen (See "Entering AdministratorSetting" on page 10-3).2 Press [Network Setting].– Some items may not be displayed depending on the optionalsettings.– In the Utility Mode, it is also possible to enter a number displayedin the key through the keypad for selection. In the case of [NetworkSetting], enter 5 through the numeric keypad.Item Description Available valueTCP/IP Setting Set the TCP/IP. ON * /OFFWhen a setting is madeto ON, set the IP Ad-dress, the SubnetMask and the DefaultGateway.
