Utility Mode 10Network Fax 10-21Utility Mode Chapter 1010.5 Initial SettingSet the default of the Fax function.It is possible to set a Fax function that is selected when the Main Power isturned on or when [Reset] is pressed.For this setting, display the Fax screen and press the [Utility/Counter] on thisscreen.* indicates factory default setting.Initial Setting1 Open the User Setting screen (See "Entering User Setting" onpage 10-2).2 Press [Initial Setting].– Some items may not be displayed depending on the optionalsettings.– In the Utility Mode, it is also possible to enter a number displayedin the key through the keypad for selection. In the case of [InitialSetting], enter 3 through the numeric keypad.Item Description Available valueFax [Current Setting]:Before entering the Utility Mode, each ofthe items that have been set on the touchpanel is registered as the default of faxfunction.[Factory Default]:Values set when shipped from the factoryare registered as the default of fax function.Current Setting / Fac-tory Default*
