Utility Mode 10Network Fax 10-49Utility Mode Chapter 1010.17 Telephone Line SettingsFor the IP address fax function, set the [Number of Redial] and the [RedialInterval]. These are normally shared with the fax function.Other items are not used for the IP Address Fax.!DetailFor the network fax function, set the [Number of Redial] and the [RedialInterval]. For other items, see "User’s Guide (Facsimile Operations)".*1 The setting value is different depending on the country.* indicates factory default setting.Telephone Line Settings1 Open the Administrator Setting screen (See "Entering AdministratorSetting" on page 10-3).2 Press [Fax Setting].– Some items may not be displayed depending on the optionalsettings.– In the Utility Mode, it is also possible to enter a number displayedin the key through the keypad for selection. In the case of [FaxSetting], enter 8 through the numeric keypad.Item Description Available valueNumber of Re-dials *1 Set the number of redials when no re-sponse is available due to the other partybeing busy.0-7 (3 times* )Redial Interval Set the intervals between the redials. 1-15 (3 min. * )
