Utility Mode 10Network Fax 10-43Utility Mode Chapter 1010.15 Header InformationRegister the Sender Name and the Fax ID.Header Information1 Open the Administrator Setting screen (See "Entering AdministratorSetting" on page 10-3).2 Press [Fax Setting].– Some items may not be displayed depending on the optionalsettings.– In the Utility Mode, it is also possible to enter a number displayedin the key through the keypad for selection. In the case of [FaxSetting], enter 8 through the numeric keypad.Item Description Available valueSender Name The name registered is printed on the doc-ument received by the other party as asender information.Up to 30 in charactersand symbols.Sender Fax No. The Fax ID registered is printed on the doc-ument received by the other party as asender information.The FAX number of the machine is normallyentered.Up to 20 characterswith 0 to 9, +, space, *and # used.Sender NameRegistrationUp to 20 sender names are registered. Thesender names thus registered can be se-lected while in the transmission.-
