3 Transmission3-36 Network FaxTransmission Chapter 33.7 When Unable to Send (IP Address Fax)If a facsimile cannot be sent due to a busy signal from the other partymachine or for some other reason, the redial function can be used for thetransmission.The redial function of this machine includes the auto redial function andmanual redial function.!DetailAddress cannot be changed by the auto redial function nor the manualredial function.Refer to page 5-2 if transmission cannot be still effected by redialing dueto a line trouble or for any other reason.There is no re-transmission function of the E-mail provided for theInternet fax. When the E-mail cannot be sent, see page 5-2.RedialingRedialing refers to dialing the number of the same destination again.If a facsimile cannot be sent due to a busy signal from the other partymachine or for some other reason, the machine redials the number after apredetermined amount of time has elapsed. During that interval before thenumber is redialed, the transmission document is treated as a reserveddocument waiting to be sent.Auto Redial functionIf a facsimile cannot be sent due to a busy signal from the other partymachine or for some other reason, the address is automatically redialedaccording to the [Number of Redials] which has been set to the TelephoneLine Settings.!DetailThe redialing function is set at factory to redial one time after a three-minute interval. The number of redials and the redialing interval can bechanged in the Utility Mode. For details, see "Telephone Line Settings"on page 10-49.
