1 - 35Chapter 1 TroubleshootingFIP1.10 Paper Jam/MisfeedStep Check Yes NoPossible causative parts:150 FEEDER ASSY (PL5.1.1)150 PAPER CASSETTE (PL2.1.50)SENSOR REGI (PL5.1.30)ACTUATOR B (PL5.1.17)LVPS (PL12.1.5)HVPS/MCU (PL12.1.19)CLUTCH REGI (PL5.1.23)CHUTE ASSY FDR1 (PL5.1.3)GEAR ASSY HOUSING (PL11.1.3)SENSOR NO PAPER (PL5.1.38, PL6.1.38, PL7.1.38,PL20.2.33)CHUTE ASSY FDR2 (PL6.1.22, PL7.1.21, PL20.2.2)PLATE ASSY BTM (PL2.1.10, PL3.1.10, PL4.1.10,PL20.3.10)ROLL ASSY RETARD (PL2.1.2, PL3.1.2, PL4.1.2,PL20.3.2)CLUTCH ASSY PH (PL5.1.21, PL6.1.21, PL7.1.20,PL20.2.21)ROLL ASSY TURN (PL20.2.14)CLUTCH PR-REGI (PL20.2.22)250 FEEDER ASSY (PL6.1.11)250 PAPER CASSETTE (PL3.1.50)550 FEEDER ASSY (PL7.1.10)550 PAPER CASSETTE (PL4.1.50)1 Does Error still occur, after removing all the jamming paperfrom the feeding tray? Go to step 2.Go to FIP1.14Paper out / Tray1, 2.2 Checking paper conditionIs the paper curled, damaged or damp?Replace thepaper with a newand dry oneGo to step 3.3Checking the paper size setupDoes the paper size in use match the size setup by GUIDEASSY END or by the driver on the PC?Go to step 4.Replace thepaper, or set upthe paper sizecorrectly.4Checking PLATE ASSY BTM for operationIs PLATE ASSY BTM pushed up, and moved up and downsmoothly, when installing Paper Cassette?Remove Paper Cassette.Check if PLATE ASSY BTM is pushed up, while installingPaper Cassette.Push PLATE ASSY BTM down and release, and check themovement.Check visually if PLATE ASSY BTM is incline to right orleft.Go to step 5.Replace PLATEASSY BTM.(RRP2.5, 3.5, 4.5,20.21)
