- 16 -Checking the Placement Environment1 1. Setup●● Checking the Placement EnvironmentPlacement EnvironmentYour printer must be placed in the followingenvironment:Temperature: 10 - 32°CHumidity: 20% - 80% RH(relative humidity)Maximumwet bulbtemperature:25°CRecommendedenvironment: 17 - 27°C, 50 - 70 % RHNote● Be careful of condensation. It may cause a malfunction.● If placing your printer in a location where the humidity ofthe surrounding air is less than 30% RH, use a humidifieror antistatic mat.WARNING● Do not install near high temperature or the fire.● Please do not install in a place from which achemical reaction is started (laboratory etc.).● Do not install near the inflammable solution, suchas alcohol and thinner.● Do not install in the place which the small child'shand reaches.● Do not install in an unstable place (the shakystand, leaning place, etc.).● Do not install in a place many humidity, dusty andthe place where direct rays hit.● Do not install in the environment of briny air andcorrosive gas.● Do not install in a place with much vibration.● Do not install in a place where the ventilation holeof the printer is closed.CAUTION● Do not place directly on a rug or carpet with longstrands.● Do not install in a closed room with poorventilation and circulation.● If you use the printer in a small room for a longtime, please make sure that you ventilate theroom.● Install away from strong magnetic fields andsources of noise.● Install away from monitors or TVs.Placement SpacePlace your printer on a flat surface that is wideenough that the printer’s feet securely on thesurface.Allow for enough room around your printer asshown in the images below.● Top view20 cm20 cm100 cm60 cm● Side view70 cm
