- 76 -Setting the Time that Elapses Before Entering the Power Save Mode2 2. Printing Basic Operation●● Setting the Time that Elapses Before Entering thePower Save ModeNote● When a printer is in the power saving mode, press the <POWER SAVE> button to restore from the mode.● Check if the message “Ready To Print” appears. If the message is not displayed, press the <ON LINE> button.1 Press the <Fn> key on the operatorpanel.2 Enter “200” using the ten-key pad andthen press the <ENTER> button.䎩䏘䏑䏆䏗䏌䏒䏑䎃䎱䏘䏐䏅䏈䏕䎕䎓䎓䎨䏑䏗䏈䏕䎃䎔䎐䎖䏇䏌䏊䏌䏗䎃 䎱䏘䏐䏅䏈䏕3 Press the scroll button or to specifythe time and then press the <ENTER>button.䎳䏒䏚䏈䏕䎃䎶䏄䏙䏈䎃䎷䏌䏐䏈䎔䎒䎖䎖䎃䏐䏌䏑䏘䏗䏈䏖䎍䎃䎔䎃䏐䏌䏑䏘䏗䏈䎕䎃䏐䏌䏑䏘䏗䏈䏖䎗䎃䏐䏌䏑䏘䏗䏈䏖4 Press the <ON LINE> button.Memo● The power save time can be selected from the followings:- [1 minute]- [2 minutes]- [3 minutes]- [4 minutes]- [5 minutes]- [10 minutes]- [15 minutes]- [30 minutes]- [60 minutes]- [120 minutes]
