Setting Up2 Printing3Before use1 Basic Device Operations4 Appendix Index- 112 -Setup to Turn OFF the Power Supply Automaticallyzz Setup to Turn OFF the Power Supply AutomaticallySetting auto power OFFmodeThe device can be set to enter OFF modeautomatically when no printing or data has beenreceived after a fixed period of time.In the default factory settings, auto power OFFmode is set automatically. Set according to theconditions for entering OFF mode."Enable": Enters OFF mode automatically"Auto Config": Enters OFF mode when the set time haselapsed. If using a network connection,however, OFF mode is not entered evenwhen the set time has elapsed."Disable": The power supply does not turn OFFautomatically.1 Press the scroll button or .2 Select [Admin Setup], and press the[OK] button.3 Enter the administrator password, andpress the [OK] button.Memoz In the default factory settings, the administratorpassword is [aaaaaa].4 Select [Power Setup], and press the[OK] button.5 Select [Auto Power Off], and press the[OK] button.6 Select [Enable] or [Auto Config], andpress the [OK] button.
