- 43 -Installing the DeviceAppendixPrinting3Setting Up2Before use1 Basic Device Operations4 IndexSetting PaperThis section explains how to set the paper in tray1 or trays 2/3/4/5.Memo In this section, setting paper in tray 1 is used as anexample. Set trays 2 to 5 using the same procedure.1 Pull out the tray 1 paper cassette ( ).2 Slide the paper guide ( ) and paperstopper ( ) to align to the size of thepaper that has been set.3 Thoroughly sort the paper. Carefullyalign the edges of the paperhorizontally.4 Set the paper with the print surfaceface-down.Note Do not exceed the " " symbol ( ) on the paperguide when setting the paper.Memo Set so there is no gap between the paper and thepaper guide or paper stopper.5 Use the paper guide to secure thepaper.6 Return the paper cassette to the tray.
