- 57 -Connecting the PCAppendixPrinting3Setting Up2Before use1 Basic Device Operations4 IndexConnecting CablesConnect the device to a PC or network.The device is equipped with the LAN (network)interface connectors and USB interfaceconnectors as standard. Connections can bemade to the network directly using LAN cables,and to the PC using USB cables.Connecting Using LAN CablesConnecting the device to a network such asLAN (Ethernet*), etc., enables the device tobe shared by all the PCs on the network. Thissystem can be used by OS such as Windows orMac, etc.*: The device is equipped with network interfaces compatiblewith 10BASE-T/100BASE -TX/1000BASE-T as standard.WindowsWindowsMacintoshMacintoshHub PreparationsLAN cable HubNote LAN cables and hubs are not enclosed with the device.Prepare LAN cables (category 5 or greater, twist paircable, straight) and hubs as necessary. The setup must be changes if using with 1000BASE-Tas the factory default settings are "Gigabit network:Disabled" in the administrator setup menu.Setup method: In the control panel, select [AdminSetup]> Enter the password> [Network Setup]> [Gigabitnetwork]> [Enable]. Connecting LAN Cables1 Connect the LAN cable to the LAN(network) interface connector ( ).Connect the other end of the LAN cableto the hub connector ( ).LAN (network)interfaceConnectorLAN cable
