- 25 -Parts Nomenclature and FunctionsAppendixBefore use1 Setting Up2 Printing3 Basic Device Operations4 IndexMain Control Panel FeaturesThe control panel can be used to check the device status and implement various device functions.The toner cartridge can be replaced while viewing the liquid crystal display on the control panel.Further, you can also perform operations while checking the messages displayed on the liquid crystalpanel if paper jams or device malfunctions occur.Referencez See the control panel menus table “Table of control panel menu items” (P.119).Control Panel AppearanceThis section explains the main control panel operations and control panel appearance.There are two types of standby screen: "Remainingtoner quantity display" and "Tray information display".Press the scroll button or the to display the "Functions"menu screen as shown on the right.The color display of the selected item is inverted.The name of the menu that is displayed.Displays the number of pages in the menudisplayed on the liquid crystal panel.If there is a scroll bar, there are items that arenot displayed in the liquid crystal panel. Pressthe scroll button or to display them.A password must be entered to display the [AdminSetup]. Enter the administrator password (factorysetting is "aaaaaa") in the password input screen.z If there is a selection menu at the next level or set values for an item, select the item and press the[OK] button to display the next screen.z If a set value is displayed, press the [OK] button to confirm the value that has been set. ( isdisplayed to the left of the value.)
