Oki C911dn User Manual

Also see for C911dn: User manual Troubleshooting guide User manual User manual Setup guide

Contents

Oki C911dn User Manual Manual pdf 59 page image

- 59 -Connecting the PCAppendixPrinting3Setting Up2Before use1 Basic Device Operations4 IndexInstaller Printer Drivers(Windows)Network ConnectionsTo connect the Windows PC and device to thenetwork, first set the device IP address. Next,install the printer drivers on the PC.If there are no DHCP or BOOTP servers on thenetwork, it is necessary to set the IP address onthe PC and device manually.Further, it is also necessary to set the IP addressin the PC and device manually if instructed toset a specific IP address determined by the in-house network administrator, provider, or routermanufacturer. Setup FlowTurning ON the device power supplySetting the IP address in the deviceTurning ON the PC power supplySetting the IP address, etc., in the PCInstalling the printer driversNote⿟ If the IP address is incorrect, the network may godown, or internet connections be disabled. Check the IPaddresses that can be set in the device with your in-housenetwork administrator or internet service provider.⿟ The server on the network (DHCP, etc.) depends on thenetwork environment in use. Check with your in-housenetwork administrator, internet service provider, or routermanufacturer.⿟ Setup requires computer administrator privileges.⿟ In "Setting Up", the operating procedure described is forWindows 7 unless otherwise specified. The screens andoperating procedure may differ depending on the OS. Setting the IP Address in theDevice Using the Control PanelMemo⿟ If configuring using a small scale network that connectsthe device to a single PC, set the following IP address(conforming to RFC1918).⿟ PC- IP address: Any from 192.168.0.1 to 254- Subnet mask: 255.255.255.0- Default gateway: Not used- DNS server: Not used⿟ Device- IP address setup: Manual from 192.168.0.1 to 254(Select a different value fom the PC.)- Subnet mask: 255.255.255.0- Default gateway: 0.0.0.0- Network size: Small scaleThis section explains the following settings as anexample.IP address: 192.168.0.3 (PC)192.168.0.2 (Device)Subnet mask: 255.255.255.0Gateway address: 192.168.0.11 Press either the scroll button oron the control panel to display the"Functions" screen.2 Press the scroll button several timesto select [Admin Setup], and then pressthe [OK] button.