- 69 -Connecting the PCAppendixPrinting3Setting Up2Before use1 Basic Device Operations4 Index Setup FlowThe setup procedure may differ depending onthe print method.EtherTalk Bonjour/RendezvousTurning ON the powersupplyTurning ON the powersupplyEnabling the deviceEtherTalkDisabling device sleepmodeTurning ON the PC powersupplyTurning ON the PC powersupplySetting EtherTalk in thePCInstalling the printerdriversInstalling the printerdriversAdding devices to the PC Adding devices to the PCGo to “Using EtherTalk”. Go to “Using Bonjour(Rendezvous)” (P.72).Note Upgrading the Mac OS X or printer driver version mayresult in differences from the description in the manual. Disable all anti-virus software before starting the setup. Using EtherTalk Enable EtherTalk using the control panel,and disable sleep modeIf connecting to a network using EtherTalk, itis necessary to enable EtherTalk in the printer,and disable sleep mode. Next, install the printerdrivers in the computer.Reference People using Bonjour go to “Using Bonjour (Rendezvous)”(P.72).1 Press either the scroll button oron the control panel to display the"Functions" screen.2 Press the scroll button several timesto select [Admin Setup], and then pressthe [OK] button.3 Use the 10-key pad to enter theadministrator password.The default factory-set password is"aaaaaa". Press the [OK] button afterentering each individual character.4 Press the [OK] button.
