77-2 Administering the FierySetting passwordsYou can set or change the Administrator password for the Fiery. Anyone with theAdministrator password can modify the Setup options, and control the flow and orderof print jobs with the job management tools.When the Fiery is installed, there is no password. If you do not create an Administratorpassword, users are not required to enter a password to modify the Setup or use theadministrator functions in the job management tools. If an Administrator passwordhas been set previously, you are required to enter it when you run Setup. Use theand keys to select the characters and the ENTER key to advance and complete (see“Types of Setup screens” on page 4-4).Caution: If you decide to set an administrator password make sure you keep acareful note of it. If you lose or forget this password it cannot berecovered for you, and the internal hard disk drive containing theoperating system and all settings will need to be replaced.Controlling the job flow Using Fiery WebTools, Command WorkStation and Fieryutilities and for managing job priorities, tracking currentjobs, canceling jobs, printing jobs in the Hold queue, andreprinting from the Printed or Hold queuePrinting GuideJob Management GuideRelease NotesJob accounting Viewing, printing, and exporting the Job Log, user notesSetting automatic printing and clearing for the Job LogJob Management GuideColour management Printing with CMYK simulationsPrinting colour samples and swatch pagesInstalling colour profilesColour GuideUser Software InstallationGuideMaintaining optimal FieryperformanceTipsDeleting jobs, clearing queuespage 7-9, andJob Management GuideTroubleshooting Troubleshooting Fiery Setup Appendix AFor these operations And these tasks See
