44-19 Network Setup optionsClear Frame TypesYou can clear all frame types at once by choosing Exit IPX/SPX Setup, choosingIPX/SPX Setup, and then choosing Clear Frame Types.Select Frame TypesEnable IPX Auto Frame TypeYes/No [No]Specify whether the Fiery should try to bind to all available frame types automatically.The Fiery does so whether or not all frame types are appropriate. To determine theframe types that were successfully bound, save your changes, exit Setup, restart theFiery, and print a Configuration page. The Configuration page lists only one of theframe types that were successfully bound.If you answer No to this option, you can select frame types manually. You must chooseat least one frame type to enable IPX/SPX protocols.The frame selection screen allows you to make multiple selections. Depending on yourPort Setup selection, only Ethernet frame types or all frame types are displayed.Press [ENTER] for each frame type used on your IPX/SPX network. An asterisk (*)appears beside each selected frame type. Press the line selection button again to cancela selected frame type. Use the up and down arrow buttons to scroll to additional frametypes. The Fiery binds to each frame type as you select it.When you have selected all the frame types used, choose Exit IPX/SPX Setup.
