22-13 Fiery on a NetWare networkSetting up a NetWare print queue for binderyFor NetWare in emulation mode, the NetWare print server and print queue forthe Fiery are created and configured from NetWare Print Console (PCONSOLE), aNetWare utility that is stored in the NetWare PUBLIC directory.As with NDS, you can create several NetWare entities on a Novell server, and you canthen select them in Network Setup.Setting up NetWare Windows clients for printingBefore setting up client workstations for printing, perform Network Setup (seepage 4-7), and verify that the settings reflect the entities you created in the NetWareadministrator utilities (see page 2-10).N OTE : For printing to the Fiery, connect all Windows clients to a NetWare server andpermit them to connect to the Netware print server or servers on which you defined aNetWare print queue for the Fiery.After the Novell server and the Fiery have been set up, client setup consists of:• Installing the networking protocol, binding it to the network adapter card, andpermitting the client to log in to the NetWare file server.On Windows 98/Me workstations, load both the IPX/SPX-compatible protocol andthe Client for NetWare Networks from the Network Control Panel.On Windows NT 4.0/2000/XP/Server 2003 workstations, install Client Services forNetWare. Use the CSNW option in the Control Panel to set printing options andspecify a preferred NetWare server.• Setting up the Fiery as a PostScript printer by installing a PostScript printer driverand the Fiery PPD (PostScript printer description).• Adding a network port and connecting the workstation to one or more NetWarequeues that have been defined for the Fiery.• Installing Fiery software, such as colour reference files.For details, see the User Software Installation Guide.
