44-20 Performing Setup from the Control PanelService Setup optionsPServer is a program in the Fiery software that services the Novell print queuesassigned to the Novell print servers set up for printing to the Fiery. When you choosePServer Setup and enable PServer, you can set up NDS (Novell Directory Services),Bindery Services, or both.LPD Setup optionsPServer Setup optionsNetwork SetupService SetupLPD Setup Enable LPDYes/No [Yes]Select Yes to allow lpd printing. For more information, see “Setting up the Fiery onTCP/IP networks” on page 2-19.Network SetupService SetupPServer Setup Enable PServerYes/No [No]Select Yes if you have a Novell network connected to the Fiery.Choose NDS Setup if your network uses NetWare in native mode. Choose BinderySetup if your network uses NetWare in bindery emulation mode.If your network uses both NDS and Bindery, set up NDS first. If you set up NDSafter Bindery, you will overwrite Bindery Setup.If your network uses both NDS and Bindery, and uses NetWare servers in binderyemulation, note that the Fiery cannot service NDS and bindery emulation serverson the same NDS tree.
