8 [Administration] Tab Page160 [Setup] Item List5 Primary Domain Controller Specify the server name or IP address of the primary domain controller when this equipmentwill log on the domain network. You can enter up to 128 alphanumerical characters andsymbols other than =, ; (semicolon), #, and \ (backslash).6 Backup Domain Controller Specify the server name or IP address of the backup domain controller when this equipmentwill log on the domain network, if required. If the Primary Domain Controller is unavailable,the Backup Domain Controller will be used to log on. You can enter up to 128alphanumerical characters and symbols other than =, ; (semicolon), #, and \ (backslash).If the wrong primary or backup domain controller is specified, the NETWORK INITIALIZING message will be displayed for upto 4 minutes while the equipment searches for the primary or backup domain controller. In that case, correct the primary orbackup domain controller setting after the NETWORK INITIALIZING message disappears.7 Logon User Name Enter a valid user name to log on to the specified domain. You can enter up to 128alphanumerical characters and symbols other than =, ; (semicolon), and #.8 Password Enter the password for the specified log on user name to log on the domain network. Youcan enter up to 128 alphanumerical characters and symbols other than =, ; (semicolon), #,and \ (backslash).9 Primary WINS Server Specify the IP address of the primary WINS server when the WINS server is used to providethe NetBIOS name in your local area network. This option would be more useful to accessthis equipment using the NetBIOS Name from a different subnet.When the [Obtain a WINS Server Address automatically] option is enabled in the TCP/IP settings, the primary and secondaryWINS server address can be obtained using the DHCP server.P.148 “Setting up TCP/IP”10 Secondary WINS Server Specify the IP address of the secondary WINS server as you require when the WINS serveris used to provide NetBIOS name in your local area network. If the Primary WINS Server isunavailable, the Secondary WINS Server will be used.When the [Obtain a WINS Server Address automatically] option is enabled in the TCP/IP settings, the primary and secondaryWINS server address can be obtained using the DHCP server.P.148 “Setting up TCP/IP”If "0.0.0.0" is entered for the Primary WINS Server and Secondary WINS Server, this equipment will not use the WINS server.11 SMB Signing of SMB Server Select whether SMB Signing is enabled or disabled when a client accesses this equipmentusing SMB, such as when a client accesses the shared folder in this equipment.y If client agrees,digital signature is done for the communication. — Select this touse the digital signature to secure communication only when a client accesses thisequipment with a digital signature. Even if a client accesses this equipment without adigital signature, the communication is allowed without the digital signature.y Digital signature is always done for the communication on the server side. —Select this to allow the communication only when a client accesses this equipment witha digital signature. When a client accesses this equipment without a digital signature,the communication is not allowed.y Digital signature isn't done for the communication for the server. — Select this toallow the communication only when a client accesses this equipment without a digitalsignature. When a client is set to always access an SMB server with a digital signature,the communication is not allowed.If you do not know whether the SMB Signing of SMB Client is enabled or disabled in the client computers, it is recommendedto select [If client agrees,digital signature is done for the communication.]. If this is set incorrectly, the SMB communicationmay become unavailable.Item name Description
