8.[Administration] Tab Page[Setup] Item List 1758 [Administration] Tab Pagey The protocol selecting list of the Wake Up setting is made to select the desired protocols regardless of whether theselected protocol is enabled or disabled on each protocol setting. If the selected protocol is disabled on its protocolsetting, however, the Wake Up setting is disabled either and therefore this equipment will not be recovered from theSuper Sleep mode.y When no response is returned from this equipment after you access the network even if a protocol selected on thissetting is used, retry the access.If any of the following protocols is selected, this equipment can be recovered from the Super Sleep mode even if theWake Up setting is not set.- IPP- FTP- HTTP- SMTP- RAW9100- LPD- WebServiceItem name Description1 Protocol Select protocols to be used for recovering this equipment from the Super Sleep mode. Up to4 protocols can be selected.y ARPSelect this to enable address resolution when this equipment is used under IPv4environment.y SNMP for IPv4Select this to search this equipment over the network with SNMP protocol when ClientUtilities is used under IPv4 environment.y SNMP for IPv6Select this to search this equipment over the network with SNMP protocol when ClientUtilities is used under IPv6 environment.y SMBSelect this to enable domain name resolution when NetBIOS name is used under IPv4environment.y BonjourSelect this to search this equipment over the network with Bonjour protocol.y Neighbor Discovery(Link Local Address)Select this to enable address resolution when this equipment is used under IPv6environment.y Neighbor Discovery(Manual)Select this to enable address resolution when this equipment is used under IPv6environment.y LLMNRSelect this to enable domain name resolution when NetBIOS name is used under IPv6environment.y LLTDSelect this to search this equipment over the network with Nmap display when NetworkMapper is used.y SLPSelect this to enable service discovery when SLP is used.y Web Services for IPv4Select this to search this equipment over the network with WS-Discovery under IPv4environment.y Web Services for IPv6Select this to search this equipment over the network with WS-Discovery under IPv6environment.
