8 [Administration] Tab Page210 [Setup] Item List Setting up IPP PrintIn IPP Print, you can set the IPP Print options to enable the IPP print service.2 Port Number Enter the port number for LPR printing. You can enter a value in the range from 1 to 65535.Generally the default value "515" is used.When the same port number as the secondary one in the HTTP setting (SSL port number when SSL in the HTTP setting isenabled) is selected, you cannot access TopAccess or the e-Filing web utility. If you set it by mistake, use the control panel ofthe equipment to change the HTTP setting and enter the correct port number.3 Banners Select whether to print a banner page for each print job using LPR printing. [OFF] is set asthe default.This item is available only for some models.Item name Description1 Enable IPP Enable or disable the IPP print service. [Enable] is set as the default.2 Port80 Enable Enable or disable Port80 for IPP printing. Port631 is usually used for IPP access so usersmust specify the IPP port to the URL, i.e. "http://:631/Print", forthe IPP port. When this is enabled, this equipment allows IPP access through the Port80,which is the default port for the HTTP access so users do not have to specify the portnumber in the IPP port, i.e. "http:///Print". [Disable] is set as thedefault.3 Port Number If enabling the IPP, enter the IPP port number. You can enter a value in the range from 1 to65535. Generally the default value "631" is used.When the same port number as the secondary one in the HTTP setting (SSL port number when SSL in the HTTP setting isenabled) is selected, you cannot access TopAccess or the e-Filing web utility. If you set it by mistake, use the control panel ofthe equipment to change the HTTP setting and enter the correct port number.4 URL Display the URL for IPP printing. You cannot change the SSL URL for IPP printing. This SSLURL should be set as the print port when users set up the printer driver for IPP printing if theSSL for IPP printing is enabled.5 Enable SSL Enable or disable SSL for IPP printing. [Disable] is set as the default.y When the SSL is enabled, users can print to the IPP print port using the SSL. To print to the IPP print port using the SSL,specify the following URL for the IPP print port.https:// Address>: Port Number>/PrintExample: https://192.168.53.204:443/Printy Not all operating systems support SSL for all protocols.6 SSL Port Number Enter the port number for SSL. You can enter a value in the range from 1 to 65535.Generally the default value "443" is used.When the same port number as the secondary one in the HTTP setting (SSL port number when SSL in the HTTP setting isenabled) is selected, you cannot access TopAccess or the e-Filing web utility. If you make a mistake, use the control panel ofthe equipment to change the HTTP setting and enter the correct port number.Item name Description1234567891011
