2 SETTING ITEMS (ADMIN)100 E-MAILE-MAILThis menu allows you to set the options below.Depending on the model, [E-MAIL] is available only when the Scanner Kit or Printer/Scanner Kit is installed.y E-mail Message PropertiesSpecifies the details of the E-mail messages sent by the Scan to E-mail operation.You can set the following options:- FROM ADDRESS- FROM NAME- SUBJECT- BODYy Scan to E-mail fragmentationYou can send a Scan to E-mail job split into the specified fragment size. This option can reduce transmission errorscaused by network traffic problems.y E-mail Body String TransmissionYou can specify whether or not to send the body string.For instructions on how to display the E-MAIL screen, see the following page:P.47 “Accessing the Admin Menu”To enable Scan to E-mail, you must have an E-mail address entered in the [FROM ADDRESS] box.Item name DescriptionFROM ADDRESS Press this button to enter the E-mail address of this equipment.FROM NAME Press this button to enter the name of this equipment.SUBJECT Press this button to set the default E-mail subject. Pressing this button displays the SUBJECT screen.For details of this screen, see “Operations in the SUBJECT screen” below./ — Press this button to add date and time to the E-mail subject.— Press this button to not add date and time to the E-mail subject./ — Press to enable edit of the E-mail subject.— Press to disable edit of the E-mail subject.BODY Press this button to enter the default message body.FRAGMENT MESSAGESIZE (KB)Select the desired fragment size from the drop-down list. Press [NONE] to disable the fragmentation.BODY STRINGTRANSMISSIONy ENABLE — Press this button to send the message body.y DISABLE — Press this button to not send the message body.
