2 SETTING ITEMS (ADMIN)74 GENERAL Setting the panel calibrationYou can adjust the position of each button when properly pressing the buttons on the touch panel becomes difficult.On the panel calibration screen, touch the center of the + mark with a stylus by following the message displayed on thetouch panel.When the panel calibration operation is completed, you will be returned to the GENERAL menu (2/2).While the panel calibration operation is being performed, no other operations can be performed on the touch panel. Ifyou open the front cover of the equipment during the panel calibration operation and instructions to replace tonercartridges are displayed, close the front cover to complete the panel calibration operation before proceeding to replacethe toner cartridges. Exporting logsYou can export logs of each operation displayed in the LOG list (PRINT/SEND/RECEIVE/SCAN) on the JOB STATUSscreen to a USB storage device.1 Connect your USB storage device to the USB port on the equipment.For the location of the USB port on the equipment, refer to the Quick Start Guide “Chapter 1:PREPARATIONS”.
