2.SETTING ITEMS (ADMIN)GENERAL 532 SETTING ITEMS (ADMIN)4 Set new password and complete the setting.1) Press [NEW PASSWORD] to enter new password.2) Press [RETYPE NEW PASSWORD] to enter the new password again.3) Press [OK].When you press [NEW PASSWORD] and [RETYPE NEW PASSWORD], the on-screen keyboard is displayed.For details of the on-screen keyboard, see the following page:P.154 “On-screen keyboard”Specify a 6 to 64-character long administrator password. You can use alphanumerics and the followingsymbols.! # $ ( ) * + , - . / : ; = ? @ \ ^ _ ` { | } ~ Setting the clockYou can adjust the clock built into this equipment by entering the date and time using the digital keys.P.53 “Changing the date and time”P.54 “Changing the date format”When the time settings of the equipment are adjusted using the SNTP service, the date and time cannot be setmanually. You can make settings for the SNTP service in the TopAccess administrator mode. For details, refer to theTopAccess Guide “Chapter 8: [Administration] Tab Page”.Changing the date and time1 On the CLOCK screen, press [DATE/TIME].The DATE/TIME screen is displayed.