2 SETTING ITEMS (ADMIN)58 GENERAL Setting the calibration and registration display levelYou can set whether this equipment will use the calibration and registration settings set by a user or the administrator.The relevant buttons ([CALIBRATION], [REGISTRATION]) will appear under the ADMIN menu only or under both theUSER and ADMIN menus according to this setting.. Setting the calibrationYou can automatically calibrate the color gradation when the shading and hue are not reproduced accurately in the imagesscanned by this machine.This function allows you to make more precise adjustments than the “AUTO CALIBRATION” in the USER menu.y Whether to allow calibration by not only administrators but also users, is set by DISPLAY LEVEL.P.58 “Setting the calibration and registration display level”y Place LT or A4 paper (recommended paper) in the tray*1 before starting the calibration. If any other paper is used,calibration may not be performed properly.y If the glass is dirty or any foreign objects are stuck to it, calibration may not be performed properly. Keep the glassclean.y Do not raise the Platen cover or the Reversing Automatic Document Feeder*2 , or open the front cover while thecalibration is in progress. If this does happen, calibration cannot be finished properly.y Interrupt copying is not available during the calibration.y If the color often deviates, call your service technician.*1 Place paper in the Large Capacity Feeder if one is installed. If not, place paper in the uppermost tray in which A4 or LT has beenregistered.*2 The Reversing Automatic Document Feeder is an option depending on the model.For instructions on how to display the CALIBRATION screen, see the following page:P.47 “Accessing the Admin Menu”1 Press the button to calibrate.The available buttons differ depending on the model.2 Select the paper type and press [OK].Depending on the machine settings, the screen to select the paper type may not be displayed. In this case,proceed to the next step.Item name DescriptionCALIBRATION y USER — Press this button to display [CALIBRATION] in the ADMIN menu as well as theUSER menuy ADMIN — Press this button to display [CALIBRATION] only in the ADMIN menuREGISTRATION y USER — Press this button to display [REGISTRATION] in the ADMIN menu as well as theUSER menuy ADMIN — Press this button to display [REGISTRATION] only in the ADMIN menuItem name DescriptionCOPY Press this button to calibrate for copy jobs.PRINT Press this button to calibrate for print jobs.600 dpi PRINT Press this button to calibrate for 600 dpi print jobs.1200 dpi PRINT Press this button to calibrate for 1200 dpi print jobs.