Oki LP470s Manual Rapide
Also see for LP470b: User guideInstallation instructionsInstallation instructionsInstallation instructionsInstructions
                                                                                                                                            | |
Contents
| 
122Operação com cabo RS-232CPara imprimir com um cabo RS-232C conectado a um PC ou a um terminalde mão, faça o seguinte:➊ Remova a cobertura do USB/DIPswitch e coloque o DIPswitch (DSW) nas posiçõesDSW-1, 2, 3, 4 = (OFF, OFF,OFF, OFF).Operation with an RS-232C Cable7244 Connect the other end of theRS-232C cable to the connectoron the PC or the handheldterminal.For the connector on the PC or thehandheld terminal, see the manualsprovided with that equipment.3 Insert the RS-232C cable intothe connector.Match the arrow on the RS-232C cableconnector with the arrow beside theprinter connector, and insert it firmly.2 Remove the RS-232C connectorcover.7. Operation with an RS-232C CableTo print with an optional RS-232C cable connected to a PC or a handheldterminal, perform the following operations.1 Remove the USB/DIP switchcover, and set the DIP switch(DSW) to DSW-1, 2, 3, 4 = (OFF,OFF, OFF, OFF).2 3 41ONRS-232C cableRS-232C cover■➋ Remova a cobertura do conectorRS-232COperation with an RS-232C Cable7244 Connect the other end of theRS-232C cable to the connectoron the PC or the handheldterminal.For the connector on the PC or thehandheld terminal, see the manualsprovided with that equipment.3 Insert the RS-232C cable intothe connector.Match the arrow on the RS-232C cableconnector with the arrow beside theprinter connector, and insert it firmly.2 Remove the RS-232C connectorcover.7. Operation with an RS-232C CableTo print with an optional RS-232C cable connected to a PC or a handheldterminal, perform the following operations.1 Remove the USB/DIP switchcover, and set the DIP switch(DSW) to DSW-1, 2, 3, 4 = (OFF,OFF, OFF, OFF).2 3 41ONRS-232C cableCobertura da interfaceRS-232CCabo RS-232C➌ Insira o cabo RS-232C no conectorAlinhe a seta no conector do cabo RS-232C com a seta ao lado do conector daimpressora e insira-o firmemente➍ Conecte a outra extremidade docabo RS-232C ao conector do PCou do terminal de mãoPara obter informações sobre o conectorno PC ou no terminal de mão, consulte osmanuais fornecidos com os respectivosequipamentos |
Related manuals for Oki LP470b
manualsdatabase
Your AI-powered manual search engine