123Operação com cabo USBPara imprimir com um cabo USB opcional (tipo B mini) conectado a um PCou a um terminal de mão, faça o seguinte:➊ Remova a cobertura do USB/DIPswitch e coloque o DIP switch(DSW) nas posições DSW-1, 2,3, 4 = (ON, ON, OFF, OFF).Operation with a USB Cable8253 Connect the other end of theUSB cable to the connector onthe PC or the handheld terminal.For the connector on the PC or thehandheld terminal, see the manualsprovided with that equipment.8. Operation with a USB CableTo print with an optional USB cable (mini B type) connected to a PC or ahandheld terminal, perform the following operations.1 Remove the USB/DIP switchcover, and set the DIP switch(DSW) to DSW-1, 2, 3, 4 = (ON,ON, OFF, OFF).2 Insert the USB cable into theconnector.Match the arrow on the USB cableconnector with the arrow beside theprinter connector, and insert it firmly.2 3 41ONUSB coverUSB cable➋ Insira o cabo USB no conectorAlinhe a seta no conector do caboRS-232C com a seta ao lado do conectorda impressora e insira-o firmementeOperation with a USB Cable8253 Connect the other end of theUSB cable to the connector onthe PC or the handheld terminal.For the connector on the PC or thehandheld terminal, see the manualsprovided with that equipment.8. Operation with a USB CableTo print with an optional USB cable (mini B type) connected to a PC or ahandheld terminal, perform the following operations.1 Remove the USB/DIP switchcover, and set the DIP switch(DSW) to DSW-1, 2, 3, 4 = (ON,ON, OFF, OFF).2 Insert the USB cable into theconnector.Match the arrow on the USB cableconnector with the arrow beside theprinter connector, and insert it firmly.2 3 41ONCoberturado conectorUSBCabo USB➌ Conecte a outra extremidade docabo USB ao conector do PC ou doterminal de mãoPara obter informações sobre o conectorno PC ou no terminal de mão, consulte osmanuais fornecidos com os respectivosequipamentos