31Head check setting modeIn the head check setting mode, a check can be performed in two checking areas: theprinting area and the barcode printing areaThe presence of the head check function and the head check range settings are set bythe DIP switch (DSW) settings when the power is turned on, by button pressing status,and by the cover statusDIP switch settingsDSW-1 DSW-2 DSW-3 DSW-4(A) OFF ON OFF ON(B) ON OFF OFF ONDSWsettings Button and cover status Function Default(A) PRINT button + coveropenHead check range set asprinting areaHead checkrange set asprinting areaFEED button + cover open Head check function set asdisabled(B) PRINT button + coveropenHead check range set asbarcode printing area onlyFEED button + cover open Head check function set asdisabledSetting head check function(STATUS LED flashes green)Setting completes(STATUS LED lights green)DSW settings (A/B) + cover open + PRINT/FEED button + POWERNote: When the buzzer sound mode is enabled, the buzzer sounds upon startup.Release the PRINT/FEED button to stop the buzzer. To check the settings forhead check setting mode, see the test print output (See p. 18).To end head check setting, confirm that the STATUS LED is on in green, then turnpower off. After changing the head check setting mode, be sure to restore theDSW to their original settings.
