25Daily CareBe sure to turn the power off and remove the battery pack before performingthe following operationsn Caring for the thermal head➊ Slide the cover release lever toopen the coverWhen in dispense mode printing, firstslide the dispenser unit to the continuousprinting mode position. (See p. 16)Preparing for First-time Operation417The label installation method differs by printing mode.Continuous printing modeLabel paper Journal paper(See figure on P. 40)Label guide stopper1 Slide the cover release lever inthe arrow direction to open thecover.First, slide the dispenser unit to thecontinuous printing mode position.(See P. 21)2 While pressing the label guidestopper, slide the label guide tothe label size to be used.3 Load the paper in the printer.Make sure the roll is oriented correctly.➋ Wipe off any smudges with a clothdipped in alcohol* Do not use thinner, benzene, or kerosene.Daily Care1334slide the dispenser unit to thecontinuous printing mode position. (SeeP. 21)2 Wipe off any smudges with acloth dipped in alcohol.* Do not use thinner, benzene, orkerosene.Dispenser roller
