Loading Paper and Documents- 37 -Setup15 Enter the desired value using the ten-keypad and then press .Press the or to move to the next box.6 Press the until the top screen isdisplayed.Paper OutputYour machine outputs to the facedown or faceupstacker. Paper types that can be outputted toeach stacker are as follows.When performing duplex printing, paper outputsto the facedown stacker.Note Do not open or close the faceup stacker while printing as itmay result in a paper jam. Using the Facedown StackerDelivers paper with the print side face down.Note Check that the faceup stacker on the rear side of themachine is closed. If the faceup stacker is open, paper isalways outputted to the faceup stacker. Using the Faceup StackerDelivers paper with the print side face up.Note The faceup stacker is not available in duplex printing.1 Pull the faceup stacker on the rear sideof the machine and open it toward you.2 Unfold the faceup stacker.DocumentsYou can use the auto document feeder (ADF) orthe document glass to load documents forcopying, scanning or faxing.Document RequirementsYou cannot load the following documents on theADF. Use the document glass instead: Torn or perforated paper Curled or rolled paper Wet paper Static paper Carbon-backed paper Fabrics, metallic sheets or Transparency films Paper with staples, paper clips, ribbons, or tape Pasted paper, paper with glue Glossy paper Specially coated paperKeep the following in mind to avoid damaging thedocument glass: Do not hold a document firmly on the glass whencopying a thick document. Place hard documents gently. Avoid loading documents with sharp projections.OutputStackerSupportedpaper typePaper outputcapacityFacedown Standard Recycledpaper 150 sheets (whenpaper weight is lessthan 80 g/m2)OK
