Basic Settings for Faxing (for MB451, MB451w, MB471, MB471w, MB491, ES4191 MFP only)- 43 -Setup1Connecting PBX, Home Telephone orBusiness PhonePlug the [Telephone cable] connected to the[Public Line (Analog)] into the [LINEconnection] of your machine.Remove the telephone connector cover.Plug the telephone cable connected to a controldevice including PBX, etc. into the [TELconnection] of your machine.- Home Telephone -A number of telephones are connected with one ortwo telephone lines to allow internal and doorphone communication. This is simple switchingequipment for household.- Business Phone -More than two telephone lines can beaccommodated, and these telephone lines can beshared with a number of telephones to allowinternal communication. This is simple switchingequipment.Connecting as an Internal TelephonePlug the [Telephone cable] connected to acontrol device including PBX, etc. into the [LINEconnection] of your machine.Memo Set [PBX Line] to [ON]. Refer to "PBX Connecting" P. 45.Settings for each dialing typeThe factory default [MF (Tone)/DP (Pulse)] isset to [Tone]. For push-button phones, if you hear a "Beep, boop,beep" sound, leave [MF (Tone)/DP (Pulse)] as[Tone]. For push-button type phones, if you do not hear a"Beep, boop, beep" sound, or if you are using arotary-dial type phone, set [MF (Tone)/DP(Pulse)] to [Pulse]. How to Configure Settings1 Press the <SETTING> key on theoperator panel.2 Press the to select [Admin Setup],and press .3 Enter the administrator password.The factory default password is "aaaaaa".4 Select [Enter], and press .5 Press the to select [User Install],and press .6 Press , select [MF (Tone)/DP(Pulse)], and then press .7 Press , select Dial Type, and then press.LINE connectionTEL connectionTelephone cablePublic Line(Analog)Control deviceincluding PBX,etc.LINE connectionPublic Line(Analog)Telephone cableControl deviceincluding PBX,etc.OKOKOKOKOK
