Paper recommendations > 30PAPER RECOMMENDATIONSYour MFP will handle a variety of print media, including a range of paper weights and sizes.This section provides general advice on choice of media, and explains how to use each type.The best performance will be obtained when using standard 75~90g/m² paper designedfor use in copiers and laser printers.Use of heavily embossed or very rough textured paper is not recommended.Pre-printed stationery can be used, but the ink must not offset when exposed to the highfuser temperatures used in the printing process.EnvelopesLabelsCAUTION!Envelopes should be free from twist, curl or other deformations.They should also be of the rectangular flap type, with glue thatremains intact when subjected to hot roll pressure fusing used inthis type of printer. Window envelopes are not suitable.CAUTION!Labels should also be of the type recommended for use in copiersand laser printers, in which the base carrier page is entirelycovered by labels. Other types of label stock may damage theprinter due to the labels peeling off during the printing process.
