Paper recommendations > 32M ULTI PURPOSE TRAYThe multi purpose tray can handle the same sizes as the cassette trays but in weights upto 220 g/m². For very heavy paper stock use the rear output tray. This ensures that thepaper path through the printer is almost straight.The multi purpose tray can feed paper widths from 64mm to 216mm and lengths from127.0mm to 1321mm (banner printing).For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and128g/m² and the rear output tray.Use the multi purpose tray for printing on envelopes. Up to 10 envelopes can be loaded atone time, subject to a maximum stacking depth of 10mm.O UTPUT TRAYThe output tray on the top of the printer can hold up to 150 sheets of 80g/m² standardpaper, and can handle paper stocks up to 176g/m².Pages printed in reading order (page 1 first) will be sorted in reading order (last page ontop, facing down).R EAR OUTPUT TRAYThe rear output tray at the rear of the printer should be opened and the tray extensionpulled out when required for use. In this condition paper will exit via this path, regardlessof driver settings.The rear output tray can hold up to 100 sheets of 80g/m² standard paper, and can handlestocks up to 220 g/m².Always use this rear output tray and the multi purpose feeder for paper stocks heavier than176g/m².D UPLEXAutomatic two-sided printing on the same range of paper sizes as tray 2 (i.e. all cassettesizes except A6), using paper stocks from 64 - 176g/m².NOTEThe rear output tray cannot be used when printing duplex.
