Faxing > 88F AXINGS ENDING A FAX FROM THE MFPThis section details how to send a fax directly from your MFP.BASIC OPERATION1. Place your document(s) with text face UP in the ADF or face DOWN on the glass.2. Press the Fax button (1) on the control panel to prompt the Fax Mode screen.3. Ensure Fax is highlighted, then press OK.4. Set your destination and send properties as required. Refer to “Advanced operation”on page 89 for details.5. Press the MONO button (2) to start sending your document(s).NOTEIf your Administrator has enabled access control on your machine, it willautomatically start up in access control mode. You will not be able to use ituntil you have provided valid login information. Refer to “User authenticationand access control” on page 38 for details.When faxing, you can load only A4, letter, or legal size documents in the ADF,and A4 or letter size documents on the document glass. You cannot load mixedsize documents.NOTEIf you wish to cancel faxing, press STOP (3) to abort the operation.You can cancel a job that is being transmitted as long as the messageindicating the job has been completed has not displayed. Refer to “Fax jobview/cancel” on page 98 for details on how to cancel a reserved job.When you select a broadcast job, the job itself is cancelled. If you want tocancel an individual destination within a broadcast job, refer to “Deletingspecified destinations” on page 91.Fax transmissions are sent in black and white only.2 31
